Status, October 2026: current. Numark still lists it among its DJ controllers.
What it is
The NS4FX is a four-channel DJ controller from Numark, launched in April 2022 (Numark product page). It is not standalone: a computer running DJ software plays the tracks. It ships with Serato DJ Lite, is fully mapped for Serato DJ Pro as a paid upgrade, and also works with VirtualDJ, which needs a Pro Infinity or Pro Subscription licence, and Algoriddim's djay on Mac, iOS and Windows.
Each of the four channels has a volume fader, a three-band EQ with full kill, a high-pass/low-pass filter knob and a crossfader assignment switch for side A, side B or bypass. The two hardware decks have 6-inch capacitive touch jog wheels with a colour display showing track position, BPM, pitch range and time, and a Layer button switches each deck between two software decks. Each deck also has eight performance pads with Cue, Auto Loop, Fader Cuts and Sampler modes, a long pitch fader with pitch bend buttons and a loop section. The FX section has six effect buttons, two paddle switches and wet/dry and beat controls.
The 24-bit, 44.1 kHz audio interface has two balanced XLR main outputs, an RCA booth output with its own level, and 1/4" and 3.5 mm headphone jacks. There are two 1/4" TS mic inputs with volume and tone, one on the front and one on the rear that switches to an RCA aux input. The main mix, the aux input and both mics also go to the computer over USB, so a livestream can carry the voice without a separate interface.
It runs on the included 12 V, 2 A power adapter, measures 597 x 274 x 61 mm and weighs 3 kg. The box holds the controller, the power adapter, a USB cable, a software download card and the paperwork.


