Status, October 2026: current. Chauvet DJ still lists the Shocker P2, and its manual covers a US/worldwide version and a UK/Europe version.
What it is
The Shocker P2 is a dual-lens, dual-zone blinder from Chauvet DJ with two penta-colour LEDs (RGBA+WW) rated at 130 W, which it also uses as a strobe (Chauvet DJ product page). Chauvet DJ gives no launch date on its page; the current manual revision is dated July 2026, and Pro Mobile reviewed the fixture in its September/October 2024 issue. It sits beside the warm-white Shocker 2, which Chauvet DJ sells in the US, Mexico and Canada only, and the Shocker Panel FX.
Chauvet DJ rates it at 1,300 lux at 2 m with a 62° beam and a 105° field, and its manual gives a strobe rate of 0 to 20 Hz. It runs on 4, 7, 12 or 20 DMX channels over 3-pin and 5-pin XLR, supports RDM, and takes a D-Fi USB dongle, not in the box, for wireless master/slave or DMX control. One unit can lead up to four others in synchronised shows, and an OLED display gives access to every function, with built-in dimming curves for smooth fades.
Power is 100 to 240 V auto-ranging through powerCON-compatible in and out, drawing 120 W at 120 V, and power linking runs 12 units at 120 V or 22 at 230 V. It weighs 3.7 kg and measures 422 x 98 x 232 mm, with an M13 bracket mounting hole. The box holds the fixture, a power cord, a powerCON to bare-end cable for the EU, and a quick reference guide. Its manual says to use a safety cable whenever it hangs overhead, to keep 50 cm of ventilation around it, never to look at the light source while it is on, and not to use it outdoors.
Strobes have safety rules the rest of a rig doesn't: the strobe lights guide sets out the UK Health and Safety Executive's recommended flash-rate limit for clubs and public performances.





